Memo an E-Mail versenden.

[fkerber]

Hi!

Einfach oben bei uses mapi dazuschreiben....
Das sollte ja mit installiert worden sein.

Wieso besitzt du keine CD?


Ciao Frederic

[Area51]

Hallo. Ich habe die komplette Delphi7 CD neuinstalliert. Bring das mit mapi aber nicht ganz fertig. Wie komm ich in den Mapi Modus?? und kann man sowas nicht ohne einen Mailklienten (Outlook ect.) machen?? Es müssen nur 2 Edit Felder gesendet werden auf mein GMX Account. mfg.

[fkerber]

Hi!

Hast du mal nach Indy geschaut?


Ciao Frederic

[jim_raynor]

Zitat:

Zitat von Area51

Bring das mit mapi aber nicht ganz fertig. Wie komm ich in den Mapi Modus?? und kann man sowas nicht ohne einen Mailklienten (Outlook ect.) machen??

lol. Mapi ist kein Modus sondern einfach eine Unit die die per uses einbinden musst. Du kannst aber auch Datei->Unit verwenden nutzen. Dann trägt er die Unit automatisch in uses ein.

Zitat:

Zitat von Area51

Es müssen nur 2 Edit Felder gesendet werden auf mein GMX Account. mfg.

Entweder mit Client und der Mapi oder wirklich mal nach Indy suchen.

[Area51]

Hallo.
Jetzt bin ich fast am Ziel. Ich müsste nur noch wissen wie ich die 2 edit felder bezeichnen muss. beim memo1 ist es ja memo1.Lines.Text. kann mir jemand sagen mit welchem Befehl ich Edit1 und Edit2 reinbringe ?? mfg.

[Mackhack]

Editfelder haben die .Text-Eigenschaft!

[Finki]

Ich hab jetzt nach genauem studieren doch mal die frage geht des jetzt auch ohne den lokalen mailing service?

[Aviator]

Relativ altes Thema aber naja. Du könntest dir mal den Indy Smtp Client anschauen. (IdSmtpClient heißt die Komponente glaube ich)
Mit der kann man auch ohne ein installiertes Mailprogramm eine Mail versenden. Zugangsdaten zu einem SMTP Server brauchst du aber dennoch. Welcher ist dann egal. Dann musst du dir eben die entsprechenden Daten zu dem Server heraussuchen.

[bernhard_LA]

Anbei ein Code Ausschnitt aus meinem E MAil Programm, alles mit DELPHI XE2 und INDY 10 ....

Delphi-Quellcode:

unit Unit_simpleEMail;

///
/// ***   very simple e mail client with INDY 10    ****
///
/// by BDLM    :
///
/// version 01 :   can read e mails from the host
/// can write e mails
///
///
///
///
///
///
///
///
///
///
///
///

interface

uses
  Winapi.Windows, Winapi.Messages, System.SysUtils, System.Variants,
  System.Classes, Vcl.Graphics, email_classes,
  Vcl.Controls, Vcl.Forms, Vcl.Dialogs, Vcl.Menus, Vcl.ComCtrls,
  IdBaseComponent, IdComponent, IdTCPConnection, IdTCPClient,
  IdSMTP,  Idtext, IdGlobalProtocols, IdGlobal,
  IdAttachment, IdMessageParts, IdAttachmentFile,
  IdExplicitTLSClientServerBase, IdMessageClient, IdPOP3, contnrs,
  IdMessage, Vcl.StdCtrls, Vcl.ExtCtrls, inifiles, IdSMTPBase;

type



  TSimpleMailForm = class(TForm)
    MainMenu1: TMainMenu;
    SimpleMailStatusBar: TStatusBar;
    File1: TMenuItem;
    Mail1: TMenuItem;
    SetUp1: TMenuItem;
    Exit1: TMenuItem;
    EmailSettingsMenuItem: TMenuItem;
    MyIndyPOP3: TIdPOP3;
    Connect1: TMenuItem;
    EMails1: TMenuItem;
    Panel1: TPanel;
    Panel2: TPanel;
    EMailInListBox: TListBox;
    Splitter1: TSplitter;
    WriteNewEMail1: TMenuItem;
    Panel3: TPanel;
    MailSubjectLabel: TLabel;
    MailFromLabel: TLabel;
    CCLabel: TLabel;
    BCCLabel: TLabel;
    MailBoxPanel: TPanel;
    Help1: TMenuItem;
    ber1: TMenuItem;
    MyIndySMTP: TIdSMTP;
    MyNewIndyMessage: TIdMessage;
    Benutzerliste1: TMenuItem;
    ffneBenutzerliste1: TMenuItem;
    MyOpenDialog: TOpenDialog;
    PageControl1: TPageControl;
    TabSheet1: TTabSheet;
    TabSheet2: TTabSheet;
    TabSheet3: TTabSheet;
    MailBodyMemo: TMemo;
    RichEdit1: TRichEdit;
    procedure Exit1Click(Sender: TObject);
    procedure Connect1Click(Sender: TObject);
    procedure EMails1Click(Sender: TObject);
    procedure EmailSettingsMenuItemClick(Sender: TObject);
    procedure FormShow(Sender: TObject);
    procedure FormCreate(Sender: TObject);
    procedure FormClose(Sender: TObject; var Action: TCloseAction);
    procedure EMailInListBoxDblClick(Sender: TObject);
    procedure WriteNewEMail1Click(Sender: TObject);
    procedure ber1Click(Sender: TObject);
    procedure Benutzerliste1Click(Sender: TObject);
    procedure ffneBenutzerliste1Click(Sender: TObject);
  private
    { Private-Deklarationen }
    FEMailUserList: TEMailUserList;
    FuserListFile: String;
    Factiveuserindex: Integer;

  public
    { Public-Deklarationen }
    MsgList: TObjectlist;

    Msg_attach : String;

    msg_to : String;

    msg_sub : String;

    msg_Line : string;



    SelectedMailItem: Integer;

    FActiveEMailUser: TEMailUser;

    Attachment: TIdAttachment;

    procedure SetActiveUser(aUserIndex: Integer);

    procedure LoadPostOfficeParameter(aFile: String);

    procedure SetSMTPValues(Sender: TObject);

    procedure SendMail(edfrom, edto, edcc, edBcc, edSubject: string;
      edContent: TStrings);

    procedure AttachFile(aAttachmentFilename: String);

    procedure DisplayMultiPartAlternative(aMsg: TIdMessage; aParentIndex, aLastIndex: Integer);

    procedure DisplayMultiPartMixed(aMsg: TIdMessage; aParentIndex, aLastIndex: Integer);

    procedure DisplayPlainText(Body: TStrings);

    procedure DisplayHTML(Body: TStrings);

    procedure DisplayMsg(aMsg: TIdMessage);

    procedure CommandLineEMail;

  end;

var
  SimpleMailForm: TSimpleMailForm;





implementation

uses Unit_email_write, Unit_email_settings, ABOUT, Unit_emailBenutzerliste;

{$R *.dfm}

procedure TSimpleMailForm.Benutzerliste1Click(Sender: TObject);
begin

     BenutzerListenAnzeigeForm.Benutzerliste := FEMailUserList;

     BenutzerListenAnzeigeForm.Show;
end;

procedure TSimpleMailForm.ber1Click(Sender: TObject);
begin
  AboutBox.Show;
end;

procedure TSimpleMailForm.Connect1Click(Sender: TObject);
begin
  if not MyIndyPOP3.Connected then
  begin
    MyIndyPOP3.Host := EMailSettingsForm.popedHost.Text;
    MyIndyPOP3.Port := StrToInt(EMailSettingsForm.popedPort.Text);
    MyIndyPOP3.UserName := EMailSettingsForm.popedUser.Text;
    MyIndyPOP3.Password := EMailSettingsForm.popedPassword.Text;
    MyIndyPOP3.Connect;
    Connect1.checked := true;
    SimpleMailStatusBar.SimpleText := ' connected to ' +
      EMailSettingsForm.popedHost.Text;
  end
  else
  begin
    MyIndyPOP3.Disconnect;

    Connect1.checked := false;

    SimpleMailStatusBar.SimpleText := ' disconnected from ' +
      EMailSettingsForm.popedHost.Text;
  end;
end;

procedure TSimpleMailForm.EMailInListBoxDblClick(Sender: TObject);
begin

  SelectedMailItem := EMailInListBox.ItemIndex;

  SimpleMailStatusBar.SimpleText := ' MailItem ' + IntToStr(SelectedMailItem);

  MailBodyMemo.Lines.Clear;

  MyIndyPOP3.Retrieve(SelectedMailItem,
    TIdMessage(MsgList.Items[SelectedMailItem - 1]));

  MailSubjectLabel.Caption := 'Subject: ' +
    TIdMessage(MsgList.Items[SelectedMailItem]).Subject;

  MailFromLabel.Caption := 'From   : ' +
    TIdMessage(MsgList.Items[SelectedMailItem]).FromList.EMailAddresses;

  BCCLabel.Caption := 'BCC    : ' + TIdMessage(MsgList.Items[SelectedMailItem])
    .BccList.EMailAddresses;

  CCLabel.Caption := 'CC    : ' + TIdMessage(MsgList.Items[SelectedMailItem])
    .CCList.EMailAddresses;

//  MailBodyMemo.Lines.AddStrings
//     (LinesFromMsg(TIdMessage(MsgList.Items[SelectedMailItem])));

DisplayMsg( TIdMessage(MsgList.Items[SelectedMailItem]));

end;


procedure TSimpleMailForm.DisplayPlainText(Body: TStrings);
begin
  // display plain text as needed...

  MailBodyMemo.Lines.AddStrings(Body);
end;

procedure TSimpleMailForm.DisplayHTML(Body: TStrings);
begin
  // display html as needed...
  RichEdit1.Lines.AddStrings(Body)
end;

procedure TSimpleMailForm.DisplayMultiPartAlternative(aMsg: TIdMessage; aParentIndex, aLastIndex: Integer);
var
  Part: TIdMessagePart;
  i: Integer;
begin
  for i := aLastIndex-1 downto aParentIndex+1 do
  begin
    Part := aMsg.MessageParts.Items[i];
    if (Part.ParentPart = aParentIndex) and (Part is TIdText) then
    begin
      if IsHeaderMediaType(Part.ContentType, 'text/html') then
      begin
        DisplayHTML(TIdText(Part).Body);
        Exit;
      end;
      if IsHeaderMediaType(Part.ContentType, 'text/plain') then
      begin
        DisplayPlainText(TIdText(Part).Body);
        Exit;
      end;
    end;
  end;
  // nothing supported to display...
end;

procedure TSimpleMailForm.DisplayMultiPartMixed(aMsg: TIdMessage; aParentIndex, aLastIndex: Integer);
var
  Part: TIdMessagePart;
  i: Integer;
begin
  for i := aLastIndex-1 downto aParentIndex+1 do
  begin
    Part := aMsg.MessageParts.Items[i];
    if (Part.ParentPart = aParentIndex) and (Part is TIdText) then
    begin
      if IsHeaderMediaType(Part.ContentType, 'multipart/alternative') then
      begin
        DisplayMultiPartAlternative(aMsg, Part.Index, aLastIndex);
        Exit;
      end;
      if IsHeaderMediaType(Part.ContentType, 'text/html') then
      begin
          DisplayHTML(TIdText(Part).body);
        Exit;
      end;
      if IsHeaderMediaType(Part.ContentType, 'text/plain') then
      begin
          DisplayPlainText(TIdText(Part).body);
        Exit;
      end;
      aLastIndex := i;
    end;
    // nothing supported to display...
  end;
end;

procedure TSimpleMailForm.DisplayMsg(aMsg: TIdMessage);
var
  ContentType: string;
begin
  ContentType := ExtractHeaderMediaType(aMsg.ContentType);

  SimpleMailStatusBar.SimpleText := ' content Type= ' + ContentType ;

  case PosInStrArray(ContentType, ['multipart/mixed', 'multipart/alternative', 'text/html', 'text/plain','text'], False) of
    0: begin
      DisplayMultiPartAlternative(aMsg, -1, aMsg.MessageParts.Count);
      Exit;
    end;
    1: begin
      DisplayMultiPartMixed(aMsg, -1, aMsg.MessageParts.Count);
      Exit;
    end;
    2: begin
      DisplayHTML(aMsg.Body);
      Exit;
    end;
    3,4: begin
      DisplayPlainText(aMsg.Body);
      Exit;
    end;
  else
    // nothing supported to display...
  end;
end ;

procedure TSimpleMailForm.EMails1Click(Sender: TObject);
var
  MailCount: Integer;
  i: Integer;
  Msg: TIdMessage;
begin

  MailBoxPanel.Caption := ' MAILBOX  ' + MyIndyPOP3.Host;

   EMailInListBox.Items.Clear;

  if MyIndyPOP3.Connected then
  begin
    MailCount := MyIndyPOP3.CheckMessages;

    SimpleMailStatusBar.SimpleText := 'Mail Box Size ' +
      IntToStr(MyIndyPOP3.RetrieveMailBoxSize) + ' Bytes' + 'Mail Count ' +
      IntToStr(MailCount);

    for i := 1 To MailCount Do
    begin
      Msg := TIdMessage.Create;
      try

        MyIndyPOP3.RetrieveHeader(i, Msg);

        MsgList.Add(Msg);

        EMailInListBox.Items.Add(DateToStr(Msg.Date) + TimeToStr(Msg.Date) +
          ' von ' + Msg.From.Text);
      finally
        ///
      end;
    end;
  end;

end;

procedure TSimpleMailForm.Exit1Click(Sender: TObject);
begin
  close;
end;

procedure TSimpleMailForm.ffneBenutzerliste1Click(Sender: TObject);
begin
   if MyOpenDialog.Execute then
   begin
     if fileexists(FuserListFile) then
  begin

    FuserListFile := MyOpenDialog.FileName;

    FEMailUserList.LoadFromFile(FuserListFile);

    SimpleMailStatusBar.SimpleText := ' load userliste : ' +  FuserListFile  + ' nr of e mail users '  + IntToStr(FEMailUserList.count) ;

  end

   end;
end;

procedure TSimpleMailForm.FormClose(Sender: TObject; var Action: TCloseAction);
begin
  MsgList.Free;

  FEMailUserList.Free;
end;

procedure TSimpleMailForm.FormCreate(Sender: TObject);
begin
  MsgList := TObjectlist.Create;

  MailSubjectLabel.Caption := 'Subject: ';

  MailFromLabel.Caption := 'From   : ';

  BCCLabel.Caption := 'BCC : ';

  CCLabel.Caption := 'CC   : ';

  FEMailUserList := TEMailUserList.Create;

end;

procedure TSimpleMailForm.FormShow(Sender: TObject);
var
  aFile: String;
  i: Integer;
begin

  for i := 1 to ParamCount do
  begin

    if ParamStr(i) = 'userfile' then
    begin
      FuserListFile := ParamStr(i + 1);
    end;

    if ParamStr(i) = 'activeuserindex' then
    begin
      Factiveuserindex := StrToInt(ParamStr(i + 1))-1;
    end;

    if ParamStr(i) = 'msg_to' then
    begin
       Msg_To := ParamStr(i + 1);
    end;

    if ParamStr(i) = 'msg_sub' then
    begin
       Msg_sub := ParamStr(i + 1);
    end;

      if ParamStr(i) = 'msg_line' then
    begin
       Msg_line := ParamStr(i + 1);
    end;

    if ParamStr(i) = 'msg_attach' then
    begin
       Msg_attach := ParamStr(i + 1);
    end;

  end;

  ///
  ///
  /// -----------------------------------
  ///
  ///

  if fileexists(FuserListFile) then
  begin

    FEMailUserList.LoadFromFile(FuserListFile);

    SimpleMailStatusBar.SimpleText := ' load userliste : '    + '       nr of e mail users  : '  + IntToStr(FEMailUserList.count)  ;

  end
  else
  begin

  SimpleMailStatusBar.SimpleText := ' userliste not found  !  command line param  :  userfile   '  ;

  end;

  if ((Factiveuserindex > -1) and (Factiveuserindex < FEMailUserList.Count ))
  then
  begin

    SetActiveUser(Factiveuserindex);

  end;


    ///
  ///
  /// -----send a mail and close the program at the end ...----------
  ///
  ///

  if (msg_to <> '')  and (msg_line<> '')  and (msg_sub <>'') then
       begin

       SimpleMailStatusBar.SimpleText := 'sending robot mail .... ';

       CommandLineEMail;

       SimpleMailStatusBar.SimpleText := 'sending robot done .... ';

       Close;

       end;

end;


procedure TSimpleMailForm.CommandLineEMail;
var  MyLines : TStrings;
begin
      MyLines :=TStringList.Create;

       SetSMTPValues(nil);

       AttachFile(msg_attach);

       MyLines.Add(msg_line);

       MyLines.Add('********************************************* ');

       MyLines.Add(' this is an automatic generated e mail ');

       MyLines.Add(' generated with  FREE SOFTWARE simple mail  ' );

       MyLines.Add(' http://sourceforge.net/projects/simpleemail/  ');

       MyLines.Add('********************************************* ');

       SendMail( FActiveEMailUser.UserEMail, msg_to, '','', msg_sub, MyLines );

       MyLines.Free;

       if (Attachment <> nil)  then freeandnil( Attachment );


end;

procedure TSimpleMailForm.SetActiveUser(aUserIndex: Integer);

begin

  FActiveEMailUser := TEMailUser(FEMailUserList.Items[aUserIndex]);

  LoadPostOfficeParameter( FActiveEMailUser.UserSettings);

end;

procedure TSimpleMailForm.LoadPostOfficeParameter(aFile: String);
var
  aIniFile: TIniFile;
begin

  aIniFile := TIniFile.Create(aFile);

  EMailSettingsForm.popedHost.Text := aIniFile.ReadString('POP3', 'Host',
    'pop3.myoffice.org');
  EMailSettingsForm.popedPort.Text := aIniFile.ReadString('POP3',
    'port', '110');
  EMailSettingsForm.popedUser.Text := aIniFile.ReadString('POP3', 'user',
    'error no user name found !');
  EMailSettingsForm.popedPassword.Text := aIniFile.ReadString('POP3',
    'password', 'error no user password found !');

  EMailSettingsForm.smtpedHost.Text := aIniFile.ReadString('smtp', 'Host',
    'pop3.myoffice.org');
  EMailSettingsForm.smtpedUser.Text := aIniFile.ReadString('smtp', 'user',
    'error no user name found !');
  EMailSettingsForm.smtpedPassword.Text := aIniFile.ReadString('smtp',
    'password', 'error no user password found !');

  aIniFile.Free;

end;

procedure TSimpleMailForm.EmailSettingsMenuItemClick(Sender: TObject);
begin

  SimpleMailStatusBar.SimpleText := 'Kontoeinstellungen anzeigen und abändern';

  EMailSettingsForm.EMailUserList := FEMailUserList;

  EMailSettingsForm.Show;
end;

procedure TSimpleMailForm.WriteNewEMail1Click(Sender: TObject);
begin

   SimpleMailStatusBar.SimpleText := 'EMails schreiben';

  WriteEMailForm.Show;
end;

procedure TSimpleMailForm.SetSMTPValues(Sender: TObject);
begin
  // Authentifizierung mit dem smtp server  ---  Server authentication
  MyIndySMTP.AuthType := TIdSMTPAuthenticationType.satDefault;

  // Benutzerdaten für Authentifizierung  --- set Server Username & Password
  MyIndySMTP.UserName := EMailSettingsForm.smtpedUser.Text;
  MyIndySMTP.Password := EMailSettingsForm.smtpedPassword.Text;

  // Server-Daten
  MyIndySMTP.Host := EMailSettingsForm.smtpedHost.Text;
  MyIndySMTP.Port := 25; // confirm this data !
end;

procedure TSimpleMailForm.AttachFile(aAttachmentFilename: String);
begin
  Attachment := TIdAttachmentFile.Create(MyNewIndyMessage.MessageParts,
    aAttachmentFilename);
end;

procedure TSimpleMailForm.SendMail(edfrom, edto, edcc, edBcc, edSubject: string;
  edContent: TStrings);
begin
  MyIndySMTP.Connect;

  try
    MyNewIndyMessage.From.Address := edfrom;
    MyNewIndyMessage.Recipients.EMailAddresses := edto;
    MyNewIndyMessage.CCList.EMailAddresses := edcc;
    MyNewIndyMessage.BccList.EMailAddresses := edBcc;
    MyNewIndyMessage.Subject := edSubject;
    MyNewIndyMessage.Body := edContent;
    MyIndySMTP.Send(MyNewIndyMessage);
  finally
    MyIndySMTP.Disconnect;
  end;
end;



end.