Win XP Setup erkennt SATA-Platte nicht

[ichbins]

Auf der CD ist eine HTML-Installationsanleitung drauf:

Zitat:

The following details the installation of the SATA150 TX Series drivers while installing Windows XP.

1. Start the installation:

• Floppy Install: Boot the computer with the Windows XP installation diskettes.

• CD-ROM Install: Boot from the CD-ROM. Press F6 when the message “Press F6 if you need to install third party SCSI or RAID driver” appears.

2. When the Windows XP Setup window is generated, press S to specify an Additional Device(s).

3. Insert the SATA150 TX Series driver diskette into drive A: and press Enter.

4. Choose WinXP Promise SATA150 TX Series Controller from the list that appears on screen, and then press the Enter.

5. The Windows XP Setup screen will appear again saying “Setup will load support for the following mass storage devices:” The list will include WinXP Promise FastTrak SATA150 TX Series Controller.

NOTE: If there are any additional devices to be installed, specify them now. When all devices are specified, continue to the next step.

6. From the Windows XP Setup screen, press the Enter. Setup will now load all device files and then continue the Windows XP installation.

Die geht aber auch davon aus, das ich eine Diskette habe

Soll ich beim Händler anrufen, dass er mir ein Image von der Diskette mailt