nach hochfahren aus hibernate fährt pc gleich wieder runter

[Cylence]

Hi,

ich hab eben noch etwas gefunden auf einer taiwanesischen seite


System Wake-up Events
======================
Your application can restore an On-Now capable computer that is in a sleeping state to the working state by using a scheduled time or a device event. This is known as a wake-up event. Use a waitable timer object to specify the time at which the system should wake. To create the object, use the CreateWaitableTimer function. To set the timer, use the SetWaitableTimer function. The pDueTime parameter specifies when the timer will be signaled. To specify that the system should wake when the timer is signaled, set the fResume parameter to TRUE.


When the system wakes automatically because of an event (other than power switch or user activity), the system automatically sets its idle timer to at least 1 minute. This timer allows applications to call the SetThreadExecutionState function to indicate that they are busy. This enables the system to shut down without affecting the user. The following criteria determine whether a system shutdown is needed:


If the system wakes automatically, it shuts down as soon as the last job is completed, as indicated by the process calling SetThreadExecutionState.
If the system wakes automatically, but the user provides new input while the event is handled, the system does not shut down when the last job finishes.
If the system is on and the user is active, the system does not enter the sleeping state.
If the system is on, no applications are busy, and the user is inactive for a long time, the system enters the sleeping state when the timer expires.


//-- Das ist wohl der zeitpunkt hier wo ich dem System sagen muß das es nun gebraucht wird:

When the system wakes automatically, the system broadcasts the PBT_APMRESUMEAUTOMATIC event to all applications. Because the user is not present, most applications should do nothing. Event-handling applications, such as fax servers, should handle their events. If you wish to determine whether the system is in this state, call the IsSystemResumeAutomatic function.

//-------------------

If the system wakes due to user activity after broadcasting PBT_APMRESUMEAUTOMATIC, the system broadcasts the PBT_APMRESUMESUSPEND event and turns on the display. Your application should reopen files that it closed when the system entered the sleeping state, and it should prepare for user input.

If an application called SetSystemPowerState with fForce set to TRUE, no applications will receive the PBT_APMQUERYSUSPEND event when the system enters the sleeping state. If the system is carrying out a critical suspension, no applications will receive the PBT_APMQUERYSUSPEND or PBT_APMSUSPEND event; they will receive only the PBT_APMRESUMECRITICAL event.

-------------------------------

Wie reagiere ich nun auf diesen Broadcast?


lg tom

[Cylence]

Hi,

hab eben hier was gefunden:

http://www.delphipraxis.net/internal....php?p=1096330

gruß


tom

[Cylence]

Hi nochmal,


ich denke so in der art müsste es gehen:

Delphi-Quellcode:

unit Unit1;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, jwawinbase, JwaWinNT;

type
  TForm1 = class(TForm)
  private
    { Private-Deklarationen }
  public
    { Public-Deklarationen }
    procedure WMPowerBroadcast(var MyMessage: TMessage); message WM_POWERBROADCAST;
  end;

var
  Form1: TForm1;

const
  PBT_APMQUERYSUSPEND = $0000;
  PBT_APMQUERYSTANDBY = $0001;

  PBT_APMQUERYSUSPENDFAILED = $0002;
  PBT_APMQUERYSTANDBYFAILED = $0003;

  PBT_APMSUSPEND = $0004;
  PBT_APMSTANDBY = $0005;

  PBT_APMRESUMECRITICAL = $0006;
  PBT_APMRESUMESUSPEND = $0007;
  PBT_APMRESUMESTANDBY = $0008;

  PBTF_APMRESUMEFROMFAILURE = $00000001;

  PBT_APMBATTERYLOW = $0009;
  PBT_APMPOWERSTATUSCHANGE = $000A;
  PBT_POWERSETTINGCHANGE = $8013;

  PBT_APMOEMEVENT = $000B;
  PBT_APMRESUMEAUTOMATIC = $0012;

implementation

{$R *.dfm}

procedure TForm1.WMPowerBroadcast(var MyMessage: TMessage);
begin
  if MyMessage.Msg = WM_POWERBROADCAST then begin
    if (MyMessage.WParam = PBT_APMQUERYSUSPEND) or (MyMessage.WParam = PBT_APMQUERYSTANDBY)
    then begin
      // windows wants to go into standby or hibernation mode 
      // Hier hin, was getan werden muss, bevor Windows in den Standby darf,
      // z.B. Netzwerk- oder Datenbankverbindungen trennen, Timer abstellen, etc.
      MyMessage.Result := 1;                           // allow standby/hibernation
      // MyMessage.Result := BROADCAST_QUERY_DENY;     // deny  standby/hibernation    
    end else if (MyMessage.WParam = PBT_APMRESUMEAUTOMATIC) or (MyMessage.WParam = PBT_APMRESUMECRITICAL) or
                (MyMessage.WParam = PBT_APMRESUMESUSPEND) or (MyMessage.WParam = PBT_APMRESUMESTANDBY)
    then begin
      // windows returns from standby or hibernation
      // Hier z.B. Verbindungen wiederherstellen
      // und Windows sagen das es benötigt wird und sich nicht automatisch ohne Usereingabe wieder ausschaltet
      SetThreadExecutionState(ES_SYSTEM_REQUIRED);
      SetThreadExecutionState(ES_DISPLAY_REQUIRED);
      SetThreadExecutionState(ES_CONTINUOUS);
    end;
  end;
end;

end.

lg tom

[himitsu]

Bit-Felder kann man verknüpfen
SetThreadExecutionState(ES_SYSTEM_REQUIRED or ES_DISPLAY_REQUIRED or ES_CONTINUOUS);

[Cylence]

Hi,

cool thanx ja und habs eben mit ruhezustand und standby getestet mit setwaitabletimer und pc fährt hoch bildschirm an player läuft los Astrein

Danke für die Hilfe

Gruß

tom